mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2159 > < Initial Inspection and Diagnostic Overview|Page 2157
Page 154
background image

YES : Intermittent malfunction.

NO : Replace the ECM [M/T] or PCM [A/T]. When the ECM [M/T] or PCM [A/T] is replaced, register the encrypted code. Refer to Chassis
Electrical, Encrypted Code Registration Criteria Table.

Diagnostic Item 15

DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by the ECM [M/T] or the PCM [A/T], and ABS-ECU
[vehicles without TCL or ASC] or ABS/TCL-ECU [vehicles with TCL] or TCL/ASC-ECU [vehicles with ASC], and convertible top control
module. [ECLIPSE SPYDER]

CAUTION:  When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.

Part 1

Initial Inspection and Diagnostic Overview|Page 2159 > < Initial Inspection and Diagnostic Overview|Page 2157