Eclipse L4-2.4L SOHC (2004)
1. Tear off the double-sided tape backing paper.
NOTE: If you attach the adhesive tape to the edge of the backing paper, it will be easy to tear off.
2. Install the rear pillar garnish.
NOTE: If the double-sided tape is difficult to affix in cold temperature, etc., warm the bonding surfaces of the body and rear pillar garnish to
about 40 - 60° C (104 - 140° F) before affixing the tape.
3. Firmly press in the rear pillar garnish.
]]B[[ ROOF DRIP MOLDING INSTALLATION
After installing the clip to the outer front pillar in alignment with its section A, cut from section B.
