mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

A/C - Inoperative/A/C Light Blinks|Page 1068 > < A/C - Inoperative/A/C Light Blinks|Page 1066
Page 6
background image

<2.4L ENGINE> 

<3.0L ENGINE> 

if the tension or deflection is outside the standard value, adjust by the following procedure.

<2.4L ENGINE> 

1. Loosen the tension pulley fixing nut A behind the tension pulley.
2. Adjust the belt deflection amount using the adjusting bolt B.
3. Tighten the fixing nut A.

Tightening torque: 44 ± 10 Nm (33 ± 7 ft. lbs.) 

CAUTION:  Check after turning the crankshaft one or more rotation clockwise.

4. Check the belt deflection amount and tension, and readjust if necessary.

<3.0L ENGINE> 

A/C - Inoperative/A/C Light Blinks|Page 1068 > < A/C - Inoperative/A/C Light Blinks|Page 1066