Eclipse L4-2.4L SOHC (2004)
normally.
STEP 8. Check the wiring harness between column switch connector C-86 (terminal 4) and ground.
NOTE: Also check joint connector C-78. If joint connector C-78 is damaged, repair or replace the connector as described in Harness Connector
Inspection.
Q: Is the wiring harness between column switch connector C-86 (terminal 4) and the ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The system should communicate with the column switch (column-ECU) normally.
