Eclipse L4-2.4L SOHC (2004)
STEP 4. Check the wiring harness from ETACS-ECU connectors C-117 (terminal 22) and C-119 (terminal 12) to driver's door lock actuator
connector E-13 (terminals 4 and 6).
NOTE: Also check junction block connector C-108 and intermediate connector C-91. If junction block connector C-108 or intermediate connector C-91
is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connectors C-117 (terminal 22) and C-119 (terminal 12) to driver's door lock actuator connector E-13
(terminals 4 and 6) in good condition?
YES: Replace the ETACS-ECU. Check that all the doors can be locked and unlocked normally.
NO: Repair the wiring harness. Check that all the doors can be locked and unlocked normally.
STEP 5. Check the front passenger's door lock actuator.
1. Remove the passenger's door lock actuator, and check it. Refer to Door Handle and Latch.
