Eclipse L4-2.4L SOHC (2004)
Check the input signals from the following switches:
-
Ignition switch: ACC
-
Windshield washer switch: ON
1. Operate the scan tool MB991958 according to the procedure below to display "F.WIPER WASH."
a. Select "Interactive Diagnosis."
b. Select "System select."
c. Select "SWS."
d. Select "SWS MONITOR."
e. Select "Function Diag."
f.
Select "WIPER."
g. Select "F.WIPER WASH."
2. Check that normal conditions are displayed on the items described in the given table.
Q: Does the scan tool display the items "FRONT WASH.SW" and "FRONT ECU ACK" as normal condition?
Normal conditions displayed for all the items: Go to Step 4.
The scan tool does not show the respective normal condition for item "FRONT WASH. SW": Replace the column switch. Check that the
windshield washer works normally.
