mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1968 > < Initial Inspection and Diagnostic Overview|Page 1966
Page 244
background image

STEP 4. Check position light (RH) connector A-32 and front-ECU connector A-10X for damage.

Q: Are position light (RH) connector A-32 and front-ECU connector A-10X in good condition?

YES: Go to Step 5.

NO: Repair or replace the connector. Refer to Harness connector Inspection. The position light (RH), the tail light (RH), and the side marker light
(RH) should illuminate normally.

Initial Inspection and Diagnostic Overview|Page 1968 > < Initial Inspection and Diagnostic Overview|Page 1966