Eclipse L4-2.4L SOHC (2004)
STEP 8. Check combination meter connector C-42 and ETACS-ECU connector C-118 for damage.
Q: Are combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the high-beam indicator light illuminates normally.
STEP 9. Check the wiring harness between combination meter connector C-42 (terminal 22) and ETACS-ECU connector C-118 (terminal 72).
Q: Is the wiring harness between combination meter connector C-42 (terminal 22) and ETACS-ECU connector C-118 (terminal 72) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the high-beam indicator light illuminates normally.
Inspection Procedure J-9
Headlight, Tail Light: Headlight Automatic Shutdown Function does not Work Normally.
NOTE: This troubleshooting requires use of scan tool MB991958 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor." See: Reading and Clearing Diagnostic Trouble Codes/How To Use SWS Monitor