mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2056 > < Initial Inspection and Diagnostic Overview|Page 2054
Page 332
background image

STEP 24. Check rear combination light (RH) connector F-09 and ETACS-ECU connector C-119 for damage.

Q: Are rear combination light (RH) connector F-09 and ETACS-ECU connector C-119 in good condition?

YES: Go to Step 25.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2056 > < Initial Inspection and Diagnostic Overview|Page 2054