mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2067 > < Initial Inspection and Diagnostic Overview|Page 2065
Page 343
background image

STEP 6. Check the wiring harness between fog light relay connector A-04X (terminals 1 and 2) and the battery.

Q: Is the wiring harness between fog light relay connector A-04X (terminals 1 and 2) and the battery in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the fog lights illuminate normally.

STEP 7. Check fog light relay connector A-04X and front-ECU connector A-10X for damage.

Q: Are fog light relay connector A-04X and front-ECU connector A-10X in good condition?

YES: Go to Step 8.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2067 > < Initial Inspection and Diagnostic Overview|Page 2065