mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2095 > < Initial Inspection and Diagnostic Overview|Page 2093
Page 371
background image

STEP 8. Check the wiring harness between dome light connector D-04 (terminal 3) <ECLIPSE-vehicles without sunroof>, D-03 (terminal 7)
<ECLIPSE-vehicles with sunroof, without vanity mirror light and ECLIPSE SPYDER> or D-25 (terminal 7) <ECLIPSE-vehicles with sunroof
and vanity mirror light> and ground.

Q: Is the wiring harness between dome light connector D-04 (terminal 3) <ECLIPSE-vehicles without sunroof>, D-03 (terminal 7) <ECLIPSE-vehicles
with sunroof, without vanity mirror light and ECLIPSE SPYDER> or D-25 (terminal 7) <ECLIPSE-vehicles with sunroof and vanity mirror light> and
ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the dome light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2095 > < Initial Inspection and Diagnostic Overview|Page 2093