Eclipse L4-2.4L SOHC (2004)
STEP 5. Check key reminder switch connector C-88 and ETACS-ECU connector C-117 for damage.
Q: Are key reminder switch connector C-88 and ETACS-ECU connector C-117 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT OPERATION",
work normally, the input signal from the key reminder switch should be normal.
STEP 6. Check the wiring harness between key reminder switch connector C-88 (terminal 6) and ETACS-ECU connector C-117 (terminal 30).
