Eclipse L4-2.4L SOHC (2004)
STEP 3. Check the wiring harness between sunroof motor assembly connector D-06 (terminal 1) and fusible link (5).
NOTE: Also check intermediate connectors C-31 and C-89. If intermediate connector C-31 or C-89 is damaged, repair or replace the connector as
described in Harness Connector Inspection.
Q: Is the wiring harness between sunroof motor assembly connector D-06 (terminal 1) and fusible link (5) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The system should communicate with the sunroof motor assembly (sunroof-ECU) normally.
STEP 4. Check sunroof motor assembly connector D-06 by backprobing in order to the battery line of the power supply circuit to the sunroof
motor assembly.
