mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2398 > < Initial Inspection and Diagnostic Overview|Page 2396
Page 111
background image

2. Check continuity while power window main switch is moved to "UP" and "DOWN" position.

Q: Is the power window main switch in good condition?

YES: Go to Step 2.

NO: Replace the power window main switch. When the power window main switch is operated, the front power window (LH) should open and
close normally.

STEP 2. Check the front power window motor (LH).

1. Remove the front power window motor (LH). Refer to Door - Door Glass and Regulator.

Initial Inspection and Diagnostic Overview|Page 2398 > < Initial Inspection and Diagnostic Overview|Page 2396