Eclipse L4-2.4L SOHC (2004)
TECHNICAL DESCRIPTION (COMMENT)
The sunroof motor assembly monitors load condition according to the current, which runs in the motor. If a predetermined current is exceeded, the
sunroof motor reverses due to safety mechanism. If the sunroof motor does not reverse when an excessive load is applied, the sunroof motor assembly
may be defective.
TROUBLESHOOTING HINT
Malfunction of the sunroof motor assembly
DIAGNOSIS
Replace the sunroof motor assembly.
The sunroof safety mechanism should work normally.
Inspection Procedure G-1
Windshield Wiper and Washer: Windshield Wiper does no not Work at All.
NOTE: This troubleshooting requires use of scan tool MB991958 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor." See: Reading and Clearing Diagnostic Trouble Codes/How To Use SWS Monitor