mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2463 > < Initial Inspection and Diagnostic Overview|Page 2461
Page 176
background image

YES: No action to be taken.

NO: Repair the wiring harness. The windshield wiper should stop at the predetermined park position.

STEP 5. Check windshield wiper motor connector A-03 and front-ECU connector A-11X for damage.

Q: Are windshield wiper motor connector A-03 and front-ECU connector A-11X in good condition?

YES: Go to Step 6.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. The windshield wiper should stop at the predetermined park position.

Initial Inspection and Diagnostic Overview|Page 2463 > < Initial Inspection and Diagnostic Overview|Page 2461