Eclipse L4-2.4L SOHC (2004)
STEP 10. Check the wiring harness between combination meter connector C-41 (terminal 52) and the ignition switch (IG1).
NOTE: Also check junction block connectors C-108 and C-111. If junction block connector C-108 or C-111 is damaged, repair or replace the
connector as described in Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-41 (terminal 52) and the ignition switch (IG1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the seat belt warning light illuminates normally.
STEP 11. Check combination meter connector C-42 and ETACS-ECU connector C-118 for damage.
Q: Are combination meter connector C-42 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 12.