Eclipse L4-2.4L SOHC (2004)
STEP 17. Check the wiring harness between front combination light (LH) connector A-26 (terminal 3) and front-ECU connector A-10X
(terminal 8).
NOTE: Also check joint connector C-77 and intermediate connector C-89. If joint connector C-77 or intermediate connector C-89 is damaged, repair or
replace the connector as described in Harness connector Inspection.
Q: Is the wiring harness between front combination light (LH) connector A-26 (terminal 3) and front-ECU connector A-10X (terminal 8) in good
condition?
YES: Replace the position light socket (LH). Check that the position light (LH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (LH) illuminates normally.
STEP 18. Check the position light bulb (RH).
