mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2569 > < Initial Inspection and Diagnostic Overview|Page 2567
Page 282
background image

STEP 53. Check the wiring harness between license plate light connector F-15 (terminal 2) and front-ECU (terminal 8) connector A-10X.

NOTE:  Also check intermediate connectors C-89 and C-90 and F-14 and joint connector C-77. If intermediate connectors C-89 or C-90 or F-14 or joint
connector C-77 is damaged, repair or replace the connector as described in Harness connector Inspection.

Q: Is the wiring harness between license plate light connector F-15 (terminal 2) and front-ECU connector A-10X (terminal 8) in good condition?

YES: Replace the license plate light socket. Check that the license plate light illuminate normally.

NO: Repair the wiring harness. Check that the license plate light illuminate normally.

Inspection Procedure J-7

One of the headlights does not illuminate.

Initial Inspection and Diagnostic Overview|Page 2569 > < Initial Inspection and Diagnostic Overview|Page 2567