mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2574 > < Initial Inspection and Diagnostic Overview|Page 2572
Page 287
background image

STEP 10. Check the wiring harness between headlight (LH) connector A-24 (terminal 1) and front-ECU connector A-10X (terminal 6).

Q: Is the wiring harness between headlight (LH) connector A-24 (terminal 1) and front-ECU connector A-10X (terminal 6) in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the headlights illuminate normally.

STEP 11. Check headlight (RH) bulb.

1. Remove the headlight (RH) bulb.
2. Check that the headlight (RH) bulb is not broken.

Q: Is headlight (RH) bulb normal?

YES: Go to Step 12.

NO: Replace the headlight bulb (RH). Check that the headlights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2574 > < Initial Inspection and Diagnostic Overview|Page 2572