mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2657 > < Initial Inspection and Diagnostic Overview|Page 2655
Page 370
background image

1. Disconnect dome light connector D-04 <ECLIPSE-vehicles without sunroof> or D-03 <ECLIPSE-vehicles with sunroof, without vanity mirror

light and ECLIPSE SPYDER> or D-25 <ECLIPSE-vehicles with sunroof and vanity mirror light>, and measure at the wiring harness side.

2. Measure the voltage between terminal 3 <ECLIPSE-vehicles without sunroof>, 7 <ECLIPSE-vehicles with sunroof and ECLIPSE SPYDER> and

ground.
-

The measured value should be approximately 12 volts (battery positive voltage).

Q: Does the measured voltage correspond with this range?

YES: Go to Step 6.

NO: Go to Step 4.

Initial Inspection and Diagnostic Overview|Page 2657 > < Initial Inspection and Diagnostic Overview|Page 2655