mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2703 > < Initial Inspection and Diagnostic Overview|Page 2701
Page 416
background image

STEP 16. Check horn relay connector A-05X and horn connector A-27 for damage.

Q: Are horn relay connector A-05X and horn connector A-27 in good condition?

YES: Go to Step 17.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn) should sound when
the theft-alarm system is triggered.

STEP 17. Check the wiring harness between horn relay connector A-05X (terminal 4) and horn connector A-27 (terminal 1).

Q: Is the wiring harness between horn relay connector A-05X (terminal 4) and horn connector A-27 (terminal 1) in good condition?

YES: Go to Step 18.

NO: Repair the wiring harness. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2703 > < Initial Inspection and Diagnostic Overview|Page 2701