Eclipse L4-2.4L SOHC (2004)
NO: Check the fit of the switch, and repair if necessary.6If the functions, which are described in "CIRCUIT OPERATION", work normally, the input
signal from the driver's door switch should be normal.
STEP 4. Check driver's door switch connector D-11 and ETACS-ECU connector C-119 for damage.
Q: Are driver's door switch connector D-11 and ETACS-ECU connector C-119 in good condition?
YES: Go to Step 5.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT OPERATION",
work normally, the input signal from the driver's door switch should be normal.
