Eclipse L4-2.4L SOHC (2004)
STEP 6. Check the wiring harness between hood switch connector A-23 (terminal 2) and ETACS-ECU connector C-117 (terminal 24).
NOTE: Also check intermediate connector C-89. If intermediate connectors C-89 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between hood switch connector A-23 (terminal 2) and ETACS-ECU connector C-117 (terminal 24) in good condition?
YES: Replace the ETACS-ECU. If the theft-alarm system operates normally, it indicates that a correct signal is sent from the hood switch.
NO: Repair the wiring harness. If the theft-alarm system operates normally, it indicates that a correct signal is sent from the hood switch.
Inspection Procedure P-9
ETACS-ECU does not Receive a Signal from the Liftgate Latch Switch <ECLIPSE> or Trunk Lid Latch Switch <ECLIPSE SPYDER>.
Liftgate Latch Switch <ECLIPSE> Or Trunk Lid Latch Switch <ECLIPSE SPYDER> Input Circuit Part 1
