mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3086 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Accelerator Pedal: Symptom Related Diagnostic Procedures

Inspection Procedure 1

Throttle Valve will not Fully Open or Close

DIAGNOSIS

STEP 1. Check the accelerator cable adjustment.

Q: Is the accelerator cable properly adjusted? 

YES: Go to Step 2.

NO: Adjust the accelerator cable by referring to, and then go to Step 4.

STEP 2. Check the return spring.

Q: Is the return spring damaged or deformed? 

YES: Go to Step 3. 

NO: Replace, then go to Step 4.

STEP 3. Check the throttle lever.

Q: Is the throttle lever damaged or deformed? 

YES: Replace, then go to Step 4. 

NO: There is no action to be taken.

STEP 4. Check symptom.

Q: Does the throttle valve fully open and close? 

YES: This diagnosis is complete. 

NO: Return to Step 1.

Inspection Procedure 2

Accelerator Pedal Operation is not Smooth (Over Acceleration)

DIAGNOSIS

STEP 1. Check the accelerator pedal.

Q: Is the accelerator pedal loose?

YES: Tighten, then go to Step 4. 

NO: Go to Step 2.

STEP 2. Check the accelerator cable wiring.

Q: Is the accelerator cable routing bent sharply?

YES: Repair, then go to Step 4. 

NO: Go to Step 3.

STEP 3. Check the accelerator cable lubricant.

Q: Is the accelerator cable lubricated sufficiently?

YES: There is no action to be taken. 

Initial Inspection and Diagnostic Overview|Page 3086 > < Initial Inspection and Diagnostic Overview