mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Pressure Regulator > < Injector Check|Page 3118
Page 2
background image

3. If it dose not turn smoothly, the O-ring may be trapped, remove the item, re-install it into the fuel rail and check again.
4. Tighten the fuel pressure regulator and fuel high-pressure hose to the specified torque.

Tightening torque:
8.8 ± 1.0 Nm (78 ± 9 in-lb) <Fuel pressure regulator>
4.9 ± 1.0 Nm (44 ±8 in-lb) <Fuel high-pressure hose>

Fuel Pressure Regulator > < Injector Check|Page 3118