Eclipse L4-2.4L SOHC (2004)
Throttle Position Sensor: Adjustments
THROTTLE POSITION SENSOR ADJUSTMENT
Required Special Tools:
-
MB991958 (MUT-III Sub Assembly)
-
MB991824: V.C.I.
-
MB991827: USB Cable
-
MB991911: Main Harness B
-
MB991348: Test Harness Set
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting the scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector. When not using scan tool follow the steps below.
1. Disconnect the throttle position sensor connector, and connect the special tool MB991348 in between. (All terminals should be connected.)
