Eclipse L4-2.4L SOHC (2004)
4. Install the driver's air bag module to the steering wheel to check fit or alignment with the steering wheel.
5. Install the passenger's (front) air bag module to the instrument panel and crossmember to check fit or alignment.
6. Install the passenger's (front) air bag module cover to the instrument panel to check fit or alignment.
Front Seat Back Assembly (Side-airbag Module)
1. Check that there is no abnormality in the seat air bag module deployment section.
2. Check that there is no connector damage, bent terminals or clamping of the harness.
Clock Spring
1. Check the clock spring connectors and protective tube for damage, and the terminals for deformation.
2. Visually check the case for damage.
Side impact sensor
NOTE: The illustration shows the side impact sensor (LH). The position of the side impact sensor (RH) is symmetrical to this.
1. Check that there is no bending or corrosion in the center pillar.
2. Check that there is no denting, breakage or bending of the side impact sensor.
3. Check that there is no clamping of the harness, connector damage or bent terminals.
Steering wheel, steering column and intermediate joint
1. Check the wiring harness (built into the steering wheel) and the connectors for damage, and the terminals for deformation.
2. Install the air bag module to check fit or alignment with the steering wheel.
3. Check the steering wheel for noise, binding or difficult operation and excessive free play.
