Eclipse L4-2.4L SOHC (2004)
2. Check the continuity by operating the remote controlled radio switch (LH) in each position.
Q: Is the remote controlled radio switch normal?
YES: Go to Step 2.
NO: Replace the remote controlled radio switch (LH).
STEP 2. Check the switch (LH) connector C-98 and clock spring connector C-96 for damage.
Q: Is remote controlled radio switch (LH) connector C-98 and clock spring connector C-96 in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The remote controlled radio switch (LH) should work normally.
STEP 3. Check the wiring harness between remote controlled radio switch connector C-98 (terminals 1 and 2) and clock spring connector C-96
(terminals 4 and 5).
Q: Are the wiring harness between emote controlled radio switch connector C-98 (terminals 1 and 2) and clock spring connector C-96 (terminals 4 and
5) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The remote controlled radio switch (LH) should work normally.
