mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Knock Sensor > < Reading and Clearing Diagnostic Trouble Codes|Page 490
Page 2
background image

1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.

INSTALLATION SERVICE POINT

>>A<< IMMOBILIZER-ECU INSTALLATION

If the immobilizer-ECU is replaced, peel off the immobilizer serial number sticker from shown position. Then attach a new immobilizer-ECU
identification sticker in the same location.

Knock Sensor > < Reading and Clearing Diagnostic Trouble Codes|Page 490