Eclipse V6-3.0L SOHC (2003)
Multi-center Display Power Supply And Ground Circuit Part 2
CIRCUIT OPERATION
The multi-center display is energized by the battery through the ignition switch (ACC) and (IG1).
TECHNICAL DESCRIPTION (COMMENT)
The ground circuit, the battery circuit, the ignition switch (ACC) circuit or the ignition switch (IG1) circuit is suspected to be open or defective.
TROUBLESHOOTING HINTS
-
Malfunction of the multi-center display
-
Damaged wiring harness and connectors
Required Special Tool:
-
MB991223: Harness Set
STEP 1. Check the multi-center display ground circuit at the multi-center display connector C-09 by backprobing.
1. Do not disconnect the multi-center display connector C-09 and measure at the harness side.