Eclipse V6-3.0L SOHC (2003)
STEP 5. Check multi-center display connector C-09 for damage.
Q: Is multi-center display connector C-09 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The multi-center display should work normally.
STEP 6. Check the wiring harness between C-09 and battery.
NOTE: After checking joint connector C-78 and intermediate connector C-89, check the wires. If joint connector C-78 and intermediate connector C-89
are damaged, repair or replace the wiring harness. Refer to Harness Connector Inspection.
Q: Is the wiring harness between C-09 and battery in good condition?
YES: There is no action to be taken.
NO: Repair the wiring harness. The multi-center display should work normally.