Eclipse V6-3.0L SOHC (2003)
STEP 12. Check the wiring harness between multi-center display connector C-09 and ignition switch (IG1).
NOTE: After checking joint connector C-78 and junction block connector C-111 and C-112, check the wires. If joint connector C-78 and junction block
connector C-111 and C-112 are damaged, repair or replace the wiring harness. Refer to Harness Connector Inspection.
Q: Is the wiring harness between multi-center display connector C-09 and ignition switch (IG1) in good condition?
YES: There is no action to be taken.
NO: Repair the wiring harness. The multi-center display should work normally.
Inspection Procedure 2
Compass Is Not Displayed.
