Eclipse V6-3.0L SOHC (2003)
The compass sensor signal flows through the Compass-ECU to multi-center display.
TECHNICAL DESCRIPTION (COMMENT)
If the compass is only not displayed on the multi-center display, the cause may be a malfunction of the Compass-ECU.
TROUBLESHOOTING HINTS
-
Malfunction of the Compass-ECU
-
Damaged wiring harness and connectors
Required Special Tool:
-
MB991223: Harness Set
STEP 1. Check the Compass-ECU connector C-38 and compass sensor connector D-23 for damage.
Q: Are the Compass-ECU connector C-38 and compass sensor D-23 in good condition?
YES: Go to Step 2.
NO: Repair or replace the connector. Refer to Harness Connector Inspection.
STEP 2. Check the compass sensor connector D-23 and Compass-ECU connector C-38.