Eclipse V6-3.0L SOHC (2003)
YES: Go to Step 8.
NO: Replace the clock spring.
STEP 8. Check the clock spring connector C-96 and switch (RH) connector C-97 for damage.
Q: Are clock spring connector C-96 and switch (RH) connector C-97 in good condition?
YES: Go to step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The remote controlled radio switch should work normally.
STEP 9. Check the wiring harness between clock spring connector C-96 (terminals 4 and 5) and switch (RH) connector C-97 (terminals 1 and
2).
Q: Is the wiring harness between clock spring connector C-96 (terminals 4 and 5) and switch (RH) connector C-97 (terminals 1 and 2) in good
condition?
YES: Replace the audio system.
NO: Repair the wiring harness. The speedometer should work normally.
Inspection Procedure 2
The System Does Not Accept The Remote Controlled Radio Switch (RH) Only.
CIRCUIT OPERATION
Refer to Inspection Procedure 1.
TECHNICAL DESCRIPTION (COMMENT)
Refer to Inspection Procedure 1.
TROUBLESHOOTING HINTS
Refer to Inspection Procedure 1.
STEP 1. Check the remote controlled radio switch (RH).