mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Body - Sunroof Judder/Vibration|Page 5271 > < Body - Sunroof Judder/Vibration
Page 2
background image

sunroof assembly. Remove the sunroof glass.

4.

Remove the sunroof assembly from the vehicle. Refer to Group 42 in the Eclipse service manual. Place the sunroof assembly upside down on a
large workbench. Be sure to protect the sunroof from scratches.

5.

Remove the sunroof motor. Refer to Group 42 in the Eclipse service manual.

6.

Remove the roof drip channel (2 screws).

7.

Remove the rear guide rail stoppers.

8.

Remove the sunshade stopper screws and stoppers from each side.

a.

Inspect the screw holes in the rail vanes. If the holes are rough use a file to smooth the edges. The sunshades could be damaged by rough
edges during removal.

9.

Remove the front and rear sunshades as a set.

PERFORM STEPS 10 THROUGH 21 ON BOTH SIDES OF THE SUNROOF ASSEMBLY.

10.

Push the drive cable assembly lift mechanism rearward with a flat-blade screwdriver.

Body - Sunroof Judder/Vibration|Page 5271 > < Body - Sunroof Judder/Vibration