Eclipse V6-3.0L SOHC (2003)
e.
Gently rotate the drive cable assembly over the top of the "tab" in the guide rail.
f.
Use the rod under the lift mechanism to pull it up into the full tilt-up position.
21.
Lower the drive cable assembly lift mechanism by using a flat-blade screwdriver to push it forward.
IMPORTANT
Push the lift guide to its maximum forward position. Confirm that the plastic tabs on the sides of the drive cable assembly are positioned inside the
guide rail.
SUNROOF TIMING
22.
To time the sunroof use a flat-blade screwdriver to push the lift mechanism until the mark on the lift mechanism is aligned between the two marks
on the guide rail. (Marks are shown here as white for clarity.)
23.
Reinstall the front and rear sunshades.
24.
Reinstall the sunshade stoppers and screws
25.
Reinstall the rear guide rail stoppers.
26.
Reinstall the root drip channel.
