Eclipse V6-3.0L SOHC (2003)
3. Remove the following parts from caliper support. <FRONT (2.4L ENGINE)>
4. Remove the following parts from caliper support. <FRONT (3.0L ENGINE)>
5. Remove the following parts from caliper support. <REAR (3.0L ENGINE)>
6. Measure the hub torque before and after pad installation.
Follow the procedure:
CAUTION: Do not apply excessive grease Excessive grease may cause brake performance to become poor
7. For front disc brake <2.4L ENGINE> and rear disc bake <3.0L ENGINE>, apply brake grease SAE J310, NLGI number 1 to the following
positions before installing the pad.
<FRONT (2.4L ENGINE)>
