Eclipse V6-3.0L SOHC (2003)
Parking Brake Shoe: Service and Repair
Lining Running-In
LINING RUNNING-IN VEHICLES WITH DRUM-IN <DISC BRAKE>
CAUTION: Carry out running-in a place with good visibility, and pay careful attention to safety because the road test carry out with the parking
brake lever pulled.
Carry out running-in by the following procedure when replacing the parking brake linings or the rear brake disc rotors.
1. Adjust the parking brake stroke to the specified value.
2. Hook a spring scale onto the center of the parking brake lever grip and pull it with a force of 98 - 147 N (22 - 33 pounds) in a direction
perpendicular to the handle.
3. Drive the vehicle at a constant speed of 35 - 50 km/h (22 -31 mph) for 100 meters (328 feet).
4. Release the parking brake and let the brakes cool for five to ten minutes.
5. Repeat the procedure in steps 2. to 4. four to five times.