Eclipse V6-3.0L SOHC (2003)
Exhaust Manifold: Specifications
FASTENER TIGHTENING SPECIFICATIONS
EXHAUST MANIFOLD
ITEM......................................................................................................................................................................................................SPECIFICATIONS
EGR pipe bolt..................................................................................................................................................................................59 ± 10 N.m (44 ± 7 ft-lb)
EGR pipe gasket bolt.........................................................................................................................................................................18 ± 2 N.m (13 ± 2 ft-lb)
Exhaust manifold nut.........................................................................................................................................................................44 ± 5 N.m (33 ± 3 ft-lb)
Heat front protector <right bank> bolt..........................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat lower protector <left bank> bolt...........................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat lower protector <right bank> bolt........................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat protector <left bank> bolt.....................................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat protector <right bank> bolt..................................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat upper protector <left bank> bolt...........................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Heat upper protector <right bank> bolt........................................................................................................................................14 ± 1 N.m (120 ± 13 in-lb)
Left bank heated oxygen sensor (front).............................................................................................................................................44 ± 5 N.m (33 ± 3 ft-lb)