Eclipse V6-3.0L SOHC (2003)
NOTE: After checking intermediate connector C-89, check the wires. If intermediate connector C-89 is damaged, repair or replace the wiring harness.
Refer to Harness Connector Inspection.
Q: Is the wiring harness between ambient sensor connector A-29 (terminals 1 and 2) and multi-center display connector C-09 (terminals 14 and 12) in
good condition?
YES: Go to Step 3.
NO: Repair the wiring harness. The multi-center display should work normally.
STEP 3. Check the ambient sensor
1. Remove the front bumper.
2. Remove the ambient sensor connector A-29.
3. Measure the resistance between the ambient connector sensor terminals at two or more temperature condition.
Q: Does the resistance value exist within the characteristic graph?
YES: There is no action to be taken.
NO: Replace the ambient sensor.
Inspection Procedure 5
The Ambient Temperature And Compass Screen Do Not Change.