Eclipse V6-3.0L SOHC (2003)
STEP 3. Check the wiring harness between multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM
connector C-57 <2.4L - A/T>, C-59 <3.0L - A/T>.
NOTE: After checking intermediate connector 6-36 and C-28, joint connector C- 77, check the wires. If intermediate connector 6-36 and C-28, joint
connector C-77 are damaged, repair or replace the wiring harness. Refer to Harness Connector Inspection.
Q: Is the wiring harness between multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM connector C-57 <2.4L -
A/T>, C-59 <3.0L - A/T> in good condition?
YES: Replace the multi-center display.
NO: Repair the wiring harness. Refer to Harness Connector Inspection.
