Eclipse V6-3.0L SOHC (2003)
Use special tool MB991248 to remove the ABS rotor.
<<C>> BACKING PLATE REMOVAL
Remove the backing plate and suspend it.
INSTALLATION SERVICE POINT
>>A<< ABS ROTOR INSTALLATION
Install the ABS rotor as shown in the illustration.
INSPECTION
^
Check the oil seal for crack or damage.
^
Check the ABS rotor for chipped teeth.
Hub Bolt Replacement
HUB BOLT REPLACEMENT
Required Special Tools:
^
MB990767: End Yoke Holder
^
MB991618: Hub Bolt Remover
1. For vehicles with rear disc brakes, remove the caliper assembly, suspend the caliper assembly with a wire and remove the brake disc.
2. For vehicles with rear drum brake, remove the brake drum.
3. Pull the hub bolt out using special tools MB990767 and MB991618.
NOTE: For vehicles with drum brakes, the hub bolts should be removed near the retainer spring installation position in order to maintain enough
clearance for removal.