Eclipse V6-3.0L SOHC (2003)
STEP 10. Check the wiring harness between column switch connector C-86 (terminal 3) and ETACS-ECU connector C-118 (terminal 59).
NOTE: Also check joint connector C-78. If joint connector C-78 is damaged, repair or replace the connector as described in Harness Connector
Inspection.
Q: Is the wiring harness between column switch connector C-86 (terminal 3) and ETACS-ECU connector C-118 (terminal 59) in good condition?
YES: Go to Step 13.
NO: Repair the wiring harness. The system should communicate with the column switch (column-ECU) normally.