Eclipse V6-3.0L SOHC (2003)
STEP 6. Check the wiring harness between ETACS-ECU connector C-119 (terminal 3) and the ground.
NOTE: Also check junction block connector C-108. If junction block connector C-108 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-119 (terminal 3) and the ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The system should communicate with the ETACS-ECU normally.
STEP 7. Check column switch connector C-86 and ETACS-ECU connector C-118 for damage.
Q: Are column switch connector C-86 and ETACS-ECU connector C-118 in good condition?
YES: Go to Step 8.
