Eclipse V6-3.0L SOHC (2003)
STEP 14. Check the wiring harness between sunroof motor assembly connector D-06 (terminal 10) and ETACS-ECU connector C-118
(terminal 59).
NOTE: Also check intermediate connector C-31 and joint connector C-78. If intermediate connector C-31 or joint connector C-78 is damaged, repair or
replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between sunroof motor assembly connector D-06 (terminal 10) and ETACS-ECU connector C-118 (terminal 59) in good
condition?
YES: Go to Step 15.
NO: Repair the wiring harness. The system should communicate with the sunroof motor assembly (sunroof-ECU) normally.
STEP 15. Replace the sunroof motor assembly.
1. Replace the sunroof motor assembly.
2. The system should communicate with the sunroof motor assembly normally.
Q: Can the system communicate with the sunroof motor assembly?
YES: No action to be taken.
NO: Replace the ETACS-ECU. The system should communicate with the sunroof motor assembly (sunroof-ECU) normally.
Inspection Procedure B-1
Tone Alarm: Ignition Key Reminder Tone Alarm Function Does Not Work Normally.
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."