Eclipse V6-3.0L SOHC (2003)
STEP 6. Check the wiring harness from ETACS-ECU connectors C-117 (terminal 22) and C-119 (terminal 12) to driver's door lock actuator
connector E-13 (terminals 4 and 6).
NOTE: Also check intermediate connector C-91 and junction block connector C-108. If intermediate connector C-91 or junction block connector C-108
is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connectors C-117 (terminal 22) and C-119 (terminal 12) to driver's door lock actuator connector E-13
(terminals 4 and 6) in good condition?
YES: Replace the ETACS-ECU. Check that the central door locking system works normally.
NO: Repair the wiring harness. Check that the central door locking system works normally.
Inspection Procedure C-2
Central Door Locking System: Some Doors Do Not Lock Or Unlock.
