mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2129 > < Initial Inspection and Diagnostic Overview|Page 2127
Page 65
background image

Central Door Lock Circuit Part 2

CIRCUIT OPERATION

-

The ETACS-ECU operates the central door lock system according to the following signals:
-

Driver's or passenger's door lock actuator switch

-

Driver's or passenger's door lock key cylinder switch

-

Door lock switch, which is incorporated in the power window main switch or power window sub switch (front RH)

-

The ETACS-ECU locks or unlocks all the doors by operating the central door lock relay (incorporated in the ECU) in response to input signals.

TECHNICAL DESCRIPTION (COMMENT)

The wiring harness between the door lock actuator or the ETACS-ECU and the door lock actuator may defective.

TROUBLESHOOTING HINTS

-

Malfunction of the driver's or front passenger's door lock actuator

-

Malfunction of the ETACS-ECU

-

Damaged harness wires or connectors

DIAGNOSIS

Required Special Tool:

-

MB991223: Test Harness Set

STEP 1. Check which door lock is defective.

Q: Which of the door locks is defective?

Driver's door : Go to Step 2.
Front passenger's door : Go to Step 5.

STEP 2. Check the driver's door lock actuator.

Initial Inspection and Diagnostic Overview|Page 2129 > < Initial Inspection and Diagnostic Overview|Page 2127