Eclipse V6-3.0L SOHC (2003)
STEP 7. Check the wiring harness from ETACS-ECU connector C-119 (terminals 12 and 13) to front passenger's door lock actuator connector
E-07 (terminals 4 and 6).
NOTE: Also check junction block connector C-108 and intermediate connector C-95. If junction block connector C-108 or intermediate connector C-95
is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connector C-119 (terminals 12 and 13) to front passenger's door lock actuator connector E-07 (terminals 4
and 6) in good condition?
YES: Replace the ETACS-ECU. Check that all the doors can be locked and unlocked normally.
NO: Repair the wiring harness. Check that all the doors can be locked and unlocked normally.
Inspection Procedure C-3
Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Switch Operation.
Central Door Lock (Door Lock Switch) Circuit
TECHNICAL DESCRIPTION (COMMENT)
The door lock switch (built into the power window switch) or the ETACS-ECU may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of the power window switch (door lock switch)
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
