Eclipse V6-3.0L SOHC (2003)
STEP 2. Check the input signal by using "DATA LIST" of the SWS monitor.
Check the input signals from the following switches:
-
Driver's door: open
-
Front passenger's door: closed
1. Operate the MUT-II as follows:
1. Select "SYSTEM SELECT."
2. Select "SWS."
3. Select "SWS MONITOR."
4. Select "DATA LIST."
5. Select "ETACS ECU."
2. Check that normal conditions are displayed on the items described in the table.
Q: The scan tool show the respective normal condition for item "FRONT DOOR SW."
YES: Go to Step 3.
NO: Refer to Inspection Procedure O-6 "ETACS-ECU does not receive a signal from the driver's or the front passenger's door switch."
STEP 3. Check the input signal (by using the Pulse check).
Check the input signals from the following switches:
-
Key reminder switch
-
Driver's or front passenger's door lock actuator switch
1. Operate the MUT-II as follows:
1. Select "SYSTEM SELECT."
2. Select "SWS."
3. Select "PULSE CHECK."
